2212 920KV CW CCW Motor:
Outer diameter
28.0 mm
24.0 mm
920kv
Fit for Dji Phantom F330 F450 F550 X525
Rotation direction Right right hand tread

Black 30A ESC:
Protective function:
Automatically select 2-3Lipo,the protection voltage is 6V/9V respectively;
Automatically select NIMH,the protection voltage of each section is 0.8V;
Safe start,throttle position is not allowed to start;
Temperature protection,110 degree surface temperature shutdown;
Out of control protection, no signal stops after 1 second.

Performance description:
-The upper limit of the speed is 210,000 rpm in 2 poles, 35,000 rpm in 12 poles, and 42,000 rpm in 14 poles.
-8KHz PWM control with speed control curve.
-Automatic throttle adaptation for more remote control devices.
-With BEC, the MCU separates the power supply and works more stably.

Extreme use:
Continuous current 30A, instant 35A, 40A for 10 seconds.
Dimensions / weight: 45*24*11 (mm), 25 grams(including line);
Voltage range: 4V-16V;
Number of batteries: 2-4Lipo (4Lipo does not allow BEC output);
BEC output: 2A continuous, (instantaneous 3A);
2Lipo 4-5 Miniature Servo;
3Lipo 3-4 micro servo;

Simonk 30A ESC:
This hardware, with the SimonK firmware, gives you the perfect solution for multirotor use:
Highest efficiency 100% N-FET design.
No low voltage cutoff, because any cutoff in a multirotor = crash.
No over temp cutoff, because any cutoff in a multirotor = crash.
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation! Nothing to program other than the throttle range.
Don’t buy a 30A multirotor ESC that doesn’t meet all these criteria! There are a lot of low quality 30A ESC out there!
Max cont. current: 30A
Peak current: 40A (10s)
Voltage: 2-3S lixx,
BEC: 5V/3A
Size: 50x23x8mm
Weight: ~28g
simonk30A-OPTO (2-6S)
Weight:25g
Size:50*23*8
Input voltage: (3-6S Lixx)
Drive current:30A (Max:40A/10S)
BEC Input : NO
Compatible signal frequency: 30Hz – 500Hz